soundcomforts

Why Do Bluetooth Hearing Aids Disconnect? Common Causes and Simple Fixes

Bluetooth hearing aids usually disconnect because of a flat battery, distance from the phone, another device taking the connection, or a phone or app update. Restarting the hearing aids and phone, then removing the old pairing and pairing again, fixes most cases. If the problem keeps returning, an audiologist can check the hearing aids themselves.

If your hearing aids drop a call halfway or stop streaming music, you are not alone. Our audiologists hear this complaint often at our Sound Comforts clinics, from people who wear Signia, Phonak, Widex, Oticon, ReSound and Starkey. Most causes are simple, and you can check them at home in a few minutes.

Quick summary

  • Most drops come from a low battery, being switched off, distance, or another Bluetooth device.
  • Phone, app and operating system updates can break a working connection.
  • Android phones vary in how well they support hearing aid streaming, so check yours.
  • The usual fix is to restart both devices, remove the old pairing and pair again.
  • If sound problems continue even when you are not streaming, the issue is not Bluetooth. Please see an audiologist.

What does it mean when Bluetooth hearing aids disconnect?

It means your hearing aids still amplify sound, but the wireless link to your phone, TV or app has dropped. Pairing is the one-time introduction between the devices, and the live connection is what has to hold afterwards.

With the myPhonak app, for example, Phonak says pairing is needed only during setup, and the app then reconnects whenever it is opened. When that automatic reconnection fails, you notice a “disconnect”.

Can a flat battery or being switched off cause a disconnection?

Yes. Hearing aids that are switched off disconnect from the phone automatically, and so does one that has run out of battery, which is why a flat or weak battery is the first thing we check.

If you use rechargeable hearing aids, make sure both are fully charged. Then place them in the charger for a moment, take them out and try again.

Do distance and other devices make Bluetooth hearing aids disconnect?

Yes. Walls, your body, interference and other connected devices, such as a car Bluetooth system, can weaken or take over the connection, so stay close to your phone and remove pairings you do not use. Phonak’s support page notes that another device may cause your hearing aids to disconnect.

In a car, the system you paired earlier may try to reconnect every time you get in. Phonak’s advice is to remove the car from your phone’s list of paired devices. If your phone sits in a back pocket or bag, try moving it to the front of your body.

Why do Bluetooth hearing aids disconnect after a phone or app update?

Updates can change how the phone handles Bluetooth, and an old pairing may stop working. Phonak says a connection can fail after an app update, a phone operating system update or a change to the hearing aid fitting.

If your hearing aids worked yesterday and not today, ask what changed. Did the phone or the app update overnight? Then follow the re-pairing steps further down.

Why do Bluetooth hearing aids disconnect from Android phones?

Android phones differ in how well they support hearing aid streaming, so confirm yours before you buy. In India, where Android phones are very common, this check matters even more.

Signia’s compatibility guide lists specific phone models, calls itself a reference only and asks users to test compatibility themselves. That is a global page, so please confirm your exact hearing aid and phone model with us. Our Signia hearing aid price guide shows the models we fit, and other brands handle Android in their own ways.

Why does only one hearing aid, or the app, disconnect?

Usually one hearing aid has restarted, run low on battery, or lost its link with the phone. The app can also lose its pairing separately from the streaming connection.

Two quick checks help here:

  • Flight mode: On rechargeable Phonak models, holding the button for about 7 seconds shows a solid orange light, which means flight mode. Switching the hearing aid off and on again exits it.
  • Both ears together: If you wear two hearing aids, wait until both appear on screen while pairing.

Still dropping out? Let an audiologist look.

If restarts and re-pairing do not hold, our audiologists can check your hearing aids, app and phone settings together. We can also explain which models suit your phone.

Book Your Free Hearing Test | Compare Hearing Aid Types

How do I fix Bluetooth hearing aids that keep disconnecting?

Work from the simplest step to the most thorough: charge both hearing aids, restart the app, the hearing aids and the phone, and only then remove the old pairing and pair again. Phonak’s Android advice follows the same order.

  1. Charge both hearing aids and keep them close to the phone.
  2. Close the hearing aid app and any background apps, then switch Bluetooth off and on.
  3. Restart the hearing aids, then restart the phone.
  4. Check that your phone’s operating system is up to date.
  5. Open your phone’s Bluetooth list and remove every hearing aid entry. Phonak’s newest models show two entries, and earlier ones show three.
  6. Pair again by following the instructions in your brand’s app.
  7. If it still fails, uninstall and reinstall the app, then repeat the steps.

Exact steps differ by brand and model, so follow your own app’s instructions where they differ.

Quick guide: what is likely wrong, and what to try first

This table matches common symptoms to likely causes, including the problem many people search as “hearing machine Bluetooth connect nahi ho raha”. It is a first-aid list, not a diagnosis.

Symptom, likely cause and first fix

What you notice Likely cause Try this first
Drops when you walk away from the phone Out of range or blocked signal Keep the phone close, on the front of your body
Drops in the car The car’s Bluetooth is taking the connection Remove the car from your phone’s paired devices
Stopped working after an update Old pairing no longer valid Remove the old pairing and pair again
Only one ear connects One aid restarted or low on battery Charge and restart both, then pair both
App cannot find the hearing aids Flight mode or Bluetooth off Check Bluetooth and exit flight mode
Connects but no streaming on Android Your phone may not support your model’s streaming Check compatibility with your audiologist

When should I see an audiologist about disconnecting hearing aids?

See an audiologist if the steps above do not hold, or if the sound itself is faulty. A simple test is to listen without streaming: if crackling or cutting out happens then too, the problem lies with the hearing aids rather than the Bluetooth connection.

At Sound Comforts, we check the hearing aids, update settings and help with pairing at our clinics. Please do not try to open or repair a hearing aid yourself.

How do I choose a Bluetooth hearing aid that suits my phone?

Tell your audiologist your exact phone model before you choose, because compatibility depends on the hearing aid model, the phone brand and its software version.

We suggest testing the hearing aids with your own phone at the clinic, for the situations that matter to you, such as calls, TV and travel. Ask us about trial terms and get them in writing. That tells you more than any brochure.

Final thoughts

Bluetooth drops are common and rarely mean the hearing aids are faulty. A flat battery, distance, a second Bluetooth device or a recent update usually explains them, and a calm restart with a clean re-pair solves most. If the trouble returns, our audiologists are happy to look at the hearing aids and your phone together.

Frequently asked questions

Why do my Bluetooth hearing aids keep disconnecting from my phone?

The usual causes are a low battery, distance, another connected device such as a car system, or a recent update. Restart both devices and re-pair.

Why did my hearing aids stop connecting after a phone update?

Updates can change how the phone manages Bluetooth. Phonak says a phone or app update can break the connection. Remove the old pairing and pair again.

Do all Android phones work with Bluetooth hearing aids?

No. Support differs by phone and hearing aid model, and Signia asks users to test compatibility themselves. Check your phone and hearing aid model with an audiologist before buying.

Can other devices interrupt Bluetooth hearing aids?

Yes. Another device connected to your phone, such as a car Bluetooth system, can take the connection, and obstacles or interference can weaken it. Moving closer or removing the other pairing usually helps.

When should I visit a clinic instead of fixing it at home?

Visit if re-pairing does not hold, one hearing aid keeps dropping, or the sound is faulty even when you are not streaming. Our audiologists can check the hearing aids.

Scroll to Top
Price Download